Waterproof CCTV Drain Camera Cable 23mm Fiberglass Push Rod Cable Pipe Inspection Sewer Camera System
Specification
| Basic Structure | Conductor+Insulation+Jacket+Hose |
| Conductor | Plain Copper/ Tinned Copper |
| Insulation | PE |
| Braid | Kevlar/ Plain Copper/ Tinned Copper |
| Jacket | PUR/TPE/PCP |
INTRODUCTION
A waterproof CCTV drain camera cable is the critical link between a pipe inspection camera head and its control unit. It determines how far the camera can travel, how clearly the signal is transmitted, and how long the equipment lasts in wet, abrasive environments. This guide covers the 23mm fiberglass push rod cable — why it is the standard choice for CCTV drain camera systems, where it is used, and how to select the right length and construction.
A CCTV pipe inspection camera cable is a composite push rod that serves two functions:
Mechanical push: a rigid but flexible rod that pushes a camera head deep into drainage pipes, sewer lines and underground conduits
Signal transmission: a conduit that carries video and control signals between the camera head and the monitor unit
Unlike a standard electrical cable, it must be stiff enough to push without buckling, yet flexible enough to navigate pipe bends — and survive constant contact with water, sludge, grit and chemicals. The 23mm diameter class balances stiffness, push capability and compatibility with common CCTV camera heads and couplers.
Municipal sewer inspection — identify blockages, cracks, root intrusion and structural damage
Drain cleaning verification — confirm lines are clear and document results
Plumbing and building inspection — locate clogs and leaks without destructive excavation
Underground pipeline surveys — inspect boreholes, ducts and conduit runs
Length — choose a reel length (e.g. 10m, 20m, 30m, 50m) that exceeds your longest routine inspection; a short reel stops the job, an oversized one adds weight
Diameter — the 23mm class suits general drain and sewer work; verify it matches your camera head coupler
Construction — confirm waterproofing, abrasion-resistant jacket and fiberglass core stiffness
Compatibility — confirm connector and diameter compatibility with your equipment supplier before integration
Rinse the cable after use in sewage, inspect the jacket for damage, store dry, avoid sharp bends, and replace the cable if jacket damage exposes the internal structure.
Q: What is a CCTV drain camera cable used for? A: It connects the camera head to the control unit in pipe inspection systems, pushing the camera through drain and sewer pipes while transmitting video and control signals.
Q: Why is the push rod cable made of fiberglass? A: Fiberglass provides high push stiffness with corrosion resistance and manageable weight, letting operators push through long horizontal pipes without kinking in wet, abrasive conditions.
Q: Is the 23mm push rod cable waterproof? A: Yes. Waterproof construction is a defining feature of this cable class, designed for repeated submersion in drainage and sewage environments.
Q: How far can a push rod camera cable reach? A: Working depth depends on reel length. Common lengths range from 10m to 50m and beyond, selected based on the inspection range required.
Q: Can this cable be used with an existing sewer camera system? A: Compatibility depends on connector type, diameter and termination. Confirm with your equipment supplier before integration.
Q: What is the difference between fiberglass and spring steel push rods? A: Fiberglass offers corrosion resistance and lighter weight with predictable push stiffness; spring steel offers metallic spring action and shape recovery. Both are used for push cameras in drains and ducts.
Q: How do I maintain a fiberglass push rod cable? A: Rinse after use in sewage, inspect the jacket for damage, store dry, avoid sharp bends, and replace if jacket damage exposes the internal structure.
About Us
ADVANTAGES
FAQ
Q: Is Derul Cable the original manufacturer?
A: Derul Cable is a special cable manufacturer. Our factory is based in Shanghai.
Q: Is the price negotiable?
A: Yes, the price is negotiable. Our price is also flexible due to several factors including purchase quantity.
Q: What is the regular MOQ for your cable?
A: Any quantity is okay to purchase for product at stock. For product with no stock, its MOQ is usually 100-200 meters per type.
Q: How can I get sample?
A: Usually you only need to pay the express freight, and after your confirmation of the product dimension and structure, we can arrange the sample and send it directly to you.
Q: Is OEM or ODM service available?
A: OEM and ODM services are both available. You can provide us with your requirement for the product and we will evaluate it to push forward.
Q: What is the regular production time?
A: For regular quantity, it usually costs about 15-25 days to produce.
Quick Links
WhatsApp: +86 13641831061
E-mail: sales@derulkable.com
Add.:No.236 Fenggao Road Fengxian District Shanghai China
Get in touch
